T

Using %R on USD/TRY

Everything you need to know about applying the Williams %R to USD/TRY — default settings, signals, and when this indicator actually works vs when it misleads you.

Reviewed by the Candleread desk · Updated 2026-04-09

The short answer

The Williams %R (%R) is a momentum indicator rated intermediate. Applied to USD/TRY (exotic pair, 50-pip spread, 2000-pip daily range), the default settings are Period: 14. Overbought: −20. Oversold: −80. Best timeframes: M15, H1, H4. Key signals: Buy when %R crosses above −80 (leaving oversold). Sell when %R crosses below −20 (leaving overbought). Best used as a timing tool within a confirmed trend, not as a standalone signal.

What Is the Williams %R?

Similar to the Stochastic oscillator but inverted — ranges from 0 to −100. Overbought above −20, oversold below −80. Fast and reactive. %R = (Highest High − Close) / (Highest High − Lowest Low) × −100. It measures where the current close sits within the recent high-low range. More sensitive than RSI — good for timing entries in confirmed trends.

%R Settings for USD/TRY

Here are the default and recommended settings for using %R on USD/TRY:

  • •Default settings: Period: 14. Overbought: −20. Oversold: −80.
  • •Category: momentum indicator
  • •Difficulty: intermediate
  • •Best timeframes: M15, H1, H4
  • •USD/TRY spread: 50 pips — widen your stops to account for spread
  • •USD/TRY daily range: 2000 pips

%R Signals on USD/TRY

Buy when %R crosses above −80 (leaving oversold). Sell when %R crosses below −20 (leaving overbought). Best used as a timing tool within a confirmed trend, not as a standalone signal. On USD/TRY, trade these signals during the European session for the cleanest price action and tightest spreads. Outside peak hours, %R signals are noisier because volume thins and spreads widen.

How to Trade USD/TRY with %R

  1. 1

    Add %R to your chart

    Open USD/TRY on your preferred timeframe (M15 or H1 or H4 recommended). Apply the Williams %R with default settings: Period: 14. Overbought: −20. Oversold: −80.

  2. 2

    Confirm the trend on a higher timeframe

    Before acting on any %R signal, check one timeframe up for the prevailing trend. Trade %R signals in the direction of the higher-timeframe trend for higher win rates.

  3. 3

    Wait for a clear %R signal

    Don't anticipate — wait for the signal to complete. Buy when %R crosses above −80 (leaving oversold).

  4. 4

    Set stop and target before entering

    Use the position size calculator. Risk 1% per trade. On USD/TRY with a 2000-pip daily range, typical stops are 400–800 pips.

  5. 5

    Manage and journal

    Move stop to breakeven after 1R. Let the trade run toward 2–3R. Journal the %R signal quality so you build data on which signals work best for USD/TRY.

When %R Fails on USD/TRY

No indicator works in every condition. %R is a momentum indicator, which means it performs best in range-to-trend transitions and struggles when momentum is flat. On USD/TRY, avoid using %R during off-hours when spreads blow out and price action becomes unreliable.

Key takeaways

  • ✓%R on USD/TRY: momentum indicator, intermediate difficulty
  • ✓Default settings: Period: 14. Overbought: −20. Oversold: −80.
  • ✓Best timeframes: M15, H1, H4
  • ✓Trade signals during European session for best results
  • ✓Always combine %R with price action and higher-timeframe trend confirmation

Frequently asked

What is the best %R setting for USD/TRY?+
The default setting (Period: 14. Overbought: −20. Oversold: −80.) works well for most traders on USD/TRY. Some scalpers use shorter periods for faster signals, but faster settings generate more false signals. Start with the default and only adjust after you've logged 50+ trades with data on signal quality.
Does %R work on USD/TRY?+
Yes. USD/TRY is a exotic pair with 2000-pip daily range and 50-pip spread. %R signals are reliable on this pair during the European session on M15/H1/H4 timeframes.
Should I use %R alone or with other indicators?+
Never use any single indicator alone. Combine %R with price action (support/resistance, candlestick patterns) and one confirmation indicator from a different category. Good combinations with %R: STOCHASTIC, RSI.
What timeframe is best for %R on USD/TRY?+
M15, H1, H4 are the best timeframes for %R. On USD/TRY, the M15 chart during the European session gives the cleanest signals.

Keep reading

STOCHASTIC on USD/TRY

RSI on USD/TRY

%R on EUR/TRY

%R on USD/MXN

Position size calculator