T

Using PSAR on AUD/JPY

Everything you need to know about applying the Parabolic SAR to AUD/JPY — default settings, signals, and when this indicator actually works vs when it misleads you.

Reviewed by the Candleread desk · Updated 2026-04-09

The short answer

The Parabolic SAR (PSAR) is a trend indicator rated beginner. Applied to AUD/JPY (minor pair, 1.5-pip spread, 85-pip daily range), the default settings are Step: 0.02. Maximum: 0.20. Best timeframes: H1, H4, D1. Key signals: Dots flip from above to below price = buy signal. Dots flip from below to above = sell signal. Use the dot as a trailing stop level — move your stop to the current dot each candle.

What Is the Parabolic SAR?

Plots dots above or below price to indicate trend direction and potential reversal points. SAR = 'Stop And Reverse.' Simple, visual, and good for trailing stops. When dots are below price, the trend is up. When dots flip above price, the trend is down. The dots accelerate as the trend continues (getting closer to price), eventually triggering a reversal signal when price touches a dot.

PSAR Settings for AUD/JPY

Here are the default and recommended settings for using PSAR on AUD/JPY:

  • •Default settings: Step: 0.02. Maximum: 0.20.
  • •Category: trend indicator
  • •Difficulty: beginner
  • •Best timeframes: H1, H4, D1
  • •AUD/JPY spread: 1.5 pips — tight enough for most indicator-based entries
  • •AUD/JPY daily range: 85 pips

PSAR Signals on AUD/JPY

Dots flip from above to below price = buy signal. Dots flip from below to above = sell signal. Use the dot as a trailing stop level — move your stop to the current dot each candle. On AUD/JPY, trade these signals during the Asian session for the cleanest price action and tightest spreads. Outside peak hours, PSAR signals are noisier because volume thins and spreads widen.

How to Trade AUD/JPY with PSAR

  1. 1

    Add PSAR to your chart

    Open AUD/JPY on your preferred timeframe (H1 or H4 or D1 recommended). Apply the Parabolic SAR with default settings: Step: 0.02. Maximum: 0.20.

  2. 2

    Confirm the trend on a higher timeframe

    Before acting on any PSAR signal, check one timeframe up for the prevailing trend. Trade PSAR signals in the direction of the higher-timeframe trend for higher win rates.

  3. 3

    Wait for a clear PSAR signal

    Don't anticipate — wait for the signal to complete. Dots flip from above to below price = buy signal.

  4. 4

    Set stop and target before entering

    Use the position size calculator. Risk 1% per trade. On AUD/JPY with a 85-pip daily range, typical stops are 17–34 pips.

  5. 5

    Manage and journal

    Move stop to breakeven after 1R. Let the trade run toward 2–3R. Journal the PSAR signal quality so you build data on which signals work best for AUD/JPY.

When PSAR Fails on AUD/JPY

No indicator works in every condition. PSAR is a trend indicator, which means it performs best in trending markets and struggles in choppy, range-bound conditions. On AUD/JPY, avoid using PSAR during the Asian session (for this pair) and during the first 5 minutes of major news releases when price spikes are noise, not signals.

Key takeaways

  • ✓PSAR on AUD/JPY: trend indicator, beginner difficulty
  • ✓Default settings: Step: 0.02. Maximum: 0.20.
  • ✓Best timeframes: H1, H4, D1
  • ✓Trade signals during Asian session for best results
  • ✓Always combine PSAR with price action and higher-timeframe trend confirmation

Frequently asked

What is the best PSAR setting for AUD/JPY?+
The default setting (Step: 0.02. Maximum: 0.20.) works well for most traders on AUD/JPY. Some scalpers use shorter periods for faster signals, but faster settings generate more false signals. Start with the default and only adjust after you've logged 50+ trades with data on signal quality.
Does PSAR work on AUD/JPY?+
Yes. AUD/JPY is a minor pair with 85-pip daily range and 1.5-pip spread. PSAR signals are reliable on this pair during the Asian session on H1/H4/D1 timeframes.
Should I use PSAR alone or with other indicators?+
Never use any single indicator alone. Combine PSAR with price action (support/resistance, candlestick patterns) and one confirmation indicator from a different category. Good combinations with PSAR: ADX, EMA.
What timeframe is best for PSAR on AUD/JPY?+
H1, H4, D1 are the best timeframes for PSAR. On AUD/JPY, the H1 chart during the Asian session gives the cleanest signals.

Keep reading

ADX on AUD/JPY

EMA on AUD/JPY

PSAR on AUD/USD

PSAR on USD/JPY

Position size calculator