Support & Resistance Bounce Strategy for EUR/JPY
The complete playbook for running a support & resistance bounce setup on EUR/JPY — when it works, when it fails, and how to size your risk.
Reviewed by the Candleread desk · Updated 2026-04-09
The support & resistance bounce strategy applied to EUR/JPY typically targets a 1:2–1:3 risk-to-reward ratio with a hold time of 1–48 hours. EUR/JPY is a minor pair with a 1.5-pip spread and 110-pip average daily range, which provides plenty of room for this strategy to work. Best timeframes for this combination: H1, H4, D1.
How Support & Resistance Bounce Works on EUR/JPY
Support & Resistance Bounce Rules for EUR/JPY
- 1
Step 1
Mark S/R levels with 2+ historical touches on H4 or D1
- 2
Step 2
Wait for price to approach the level
- 3
Step 3
Look for a rejection signal (pin bar, long wick, engulfing)
- 4
Step 4
Enter on the candle close after rejection
- 5
Step 5
Stop: 10–20 pips beyond the level
- 6
Step 6
Target: 2–3x stop distance or the opposite level
Best Conditions
When This Setup Fails
Key Numbers
The math for running support & resistance bounce on EUR/JPY:
- •Typical R:R: 1:2–1:3
- •Hold time: 1–48 hours
- •Best timeframes: H1, H4, D1
- •EUR/JPY spread: 1.5 pips
- •EUR/JPY daily range: 110 pips
- •Difficulty: beginner
Key takeaways
- ✓Support & Resistance Bounce on EUR/JPY: 1:2–1:3 R:R, hold time 1–48 hours
- ✓Best timeframes: H1, H4, D1
- ✓EUR/JPY spread (1.5 pips) — factor it into stop distance
- ✓Trade during London session + Asian–London overlap for best conditions
- ✓Risk 1% per trade, always — the calculator does the sizing